From thingiverse.com
Flight sim Joystick with Hall effect sensors and Arduino by akaki
1 1
Flight stick for flight simulator games. Appears as a regular USB joystick on Windows and Mac, thanks to the Arduino Pro Micro inside. I will upload the simple code below.Joystick position is sensed with two hall effect sensors.Pitch and Roll axes have independent springs or rubber bands.Goes...
on Sep 6
From thingiverse.com
1 1
If you can not find a swan for one of it's feathers then you can always just print a feather. Now all you need is some ink and a really important document to sign.
on Sep 6
From thingiverse.com
Inlay for The Gang (Kosmos) by jakob42
0 0
I created an inlay for the boardgame The Gang (2024, Kosmos). It allows you to easily get the chips for the current player count out and divides the cards into play and support cards.
on Sep 30
From thingiverse.com
IKEA Underverk Knob reinforcement by moreati
0 0
Reinforces the on/off/low/medium/high control knob on an Ikea Underverk extractor fan. It's intended to provide the most reinforcement it can, while still allowing the knob to fully retract and click home.
on Sep 28
From thingiverse.com
Atomic Robo action figure (Dummy 13) by SKleefeld
0 0
This is a set of Atomic Robo 'armor' for soozafone's brilliant Dummy 13 figure (https://www.printables.com/model/981111-dummy-13-version-10). I've really wanted an Atomic Robo action figure since he debuted in Brian Clevinger's and Scott Wegener's comic back in 2007. (It's still running as a...
on Sep 28
From thingiverse.com
Kensis Advantage 360 adjustable bridge by steverjuk
0 0
An adjustable bridge for the Kinesis Advantage 360, all it needs is a m 4 or 5 bolt and nut.
on Sep 27
From thingiverse.com
A Pixel position calculator by overflo
0 0
This OpenSCAD script provides a function called "rod"rod() takes 3 arguments.an Array of X,Y,Z startcoordinatesan Array of X,Y,Z targetcoordinatesNumber of pixels on this AxisThe script can generate any structure that you can descibe with coorinates.The output on the console shows the...
on Sep 27
From thingiverse.com
Belt Buckle for 44 mm belt by frigginglorious
0 0
44 mm wide belt buckle replacement for brass belt
on Sep 26
From thingiverse.com
0 0
Update 2018-10-02 The base was a bit weak so I added a new one that will handle up to 5 kg if printed in PLA - more if you use stronger plastics.When prototyping a project that includes a weight sensor, building a mock-up for the sensor is often difficult, time consuming and low precision.These...
on Sep 24
From thingiverse.com
64x32 Pixel 4mm LED Matrix Connector by emnullfuenf
0 0
This connector connects 64x32 LED matrix modules with 4mm pitch by Adafruit, Waveshare, ... It uses the magnetig screws that come with the modules. There's a channel for the cables in the middle of the connector.
on Sep 23
From thingiverse.com
0 0
Pixel art of the fastama Boo from the game Super Mario World.It consists of three pieces that are joined with glue.does not need supportsresolution 0.2
on Sep 21
From thingiverse.com
0 0
A modular list. You can put papers inside the label holders, which themselves slide in the main frame so that the order can be changed at any time ! It can either be placed on a desk using the support or hanged onto a wall.Ideal for to-do lists, lists of movies to watch or things to print ;)I...
on Sep 20
From thingiverse.com
Stencil for making dungeon map without graph paper by Julius3E8
0 0
A super small and thin stencil that makes tidy and clean dungeon maps super easy to create.If you found this useful, it would bring me great joy to see your work - so be sure to share. :)Or, just buy me a coffee: https://www.buymeacoffee.com/Julius3E8OR… better yet, please feel free to dump a...
on Sep 20
From thingiverse.com
Thingiverse - Digital Designs for Physical Objects
0 0
Download files and build them with your 3D printer, laser cutter, or CNC.
on Sep 20
From thingiverse.com
Chicago Deep Dish keycaps by shoggot
0 0
Pre-supported for resin printing. Deep dished, choc stems.
on Sep 20
From thingiverse.com
Interactive Moon Lamp with Arduino by Cybercraftics
0 0
Interactive Moon Lamp that integrates Arduino, a light, touch, and tap sensors.Key features include:Touch-activated on/off functionalityColor changes with a tap on the surfaceAutomatic on/off based on ambient light levelsOptimal brightness adjustment according to surrounding light conditionsI...
on Sep 19
From thingiverse.com
0 0
A BJD Rexouium -orignal model by Rezillo RykerI just BJDed it.This model needs a lot of toilet paper and superglue (cyanacrylate) no joke - the combination of superglue and toilet paper is very strong! Just use twisted steel wire to attach the elastic rope on hands, feet, head and tail.Eyes:If...
on Sep 19
From thingiverse.com
Venchy - The Benchy of the Galactic Republic by TheAciin
0 0
A parody of the original #3DBenchy designed to look like a Venator-class star-destroyer from Star Wars: The Clone Wars. The main hull is an original work however, the cabin, stacks and engines are all made up from components of the original design. It is intended to be a fun alternative to the...
on Sep 18
From thingiverse.com
A Hard Hat for Cat by longjie0723
0 0
Yoshi!Note: You can scale the STL file to fit your lovely cat.In my case, I scaled it to 0.8 in all direction, and 0.8 to Z (virtical) axis.Have fun!
on Sep 18
From thingiverse.com
RaspBMO (Handheld Raspberry Pi Emulator) by 3Derp
0 0
UPDATES:(3/8/15) PDF drawings detailing how to construct the USB controller for this project have been added under the source files. To create the PCB follow the 'Controller Perf Board' drawing. To assemble the controller follow the 'Controller Assembly' drawing as well as the pictures in the...
on Sep 18
From thingiverse.com
Getriebe Bibliothek für OpenSCAD / Gears Library for OpenSCAD by janssen86
0 0
OpenSCAD Bibliothek für Evolventen-Zahnräder, Schnecken und ZahnstangenEine Bibliothek zur parametrischen Erzeugung von Stirn-, Hohl- und Kegelrädern, Schnecken und Zahnstangen sowie von Zusammensetzungen. Die deutschen Begriffe werden gemäß der Definitionen in DIN 868 verwendet.Zu Begriffen und...
on Sep 16
From thingiverse.com
Folium a 3D Printed Book of Bas Relief from the Art Institute of Chicago by tomburtonwood
0 0
3D Printed Book of Bas Relief from The Art Institute of Chicago by Tom Burtonwood.Folium is released under the following Creative Commons Licensehttp://creativecommons.org/licenses/by-sa/4.0/Folium was produced at the Art Institute of Chicago between January and August 2014by Tom Burtonwood as...
on Sep 16
From thingiverse.com
OpenSCAD Gear Library with Customizer by eleotlecram
0 0
This is a remix of Jörg Janssen's "OpenSCAD Getriebe Bibliothek" (OpenSCAD Gear Library).(For instructions on how to use this thing, see bottom of this page.)Supported are:RackSpur gear¹Herringbone gear¹Rack and pinion¹Annular/Internal spur gearAnnular/Internal herrinbone gearPlanetary gearBevel...
on Sep 16
From thingiverse.com
Deep Space Nine Kit Card by Nakozen
0 0
There is currently a bug where the 'Download All Files' button takes you to a 404 page. You need to download each file separately in the 'Thing Files' tab!Joining the fleet is the Cardassian built space station orbiting the once occupied Bajor. It serves as a major trading outpost in the sector,...
on Sep 15
From thingiverse.com
Thingiverse - Digital Designs for Physical Objects
0 0
Download files and build them with your 3D printer, laser cutter, or CNC.
on Sep 13
From thingiverse.com
geometric hamburger!! maybe coasters? by misternineham
0 0
hexigonal burger and coasters maybe
on Sep 13
From thingiverse.com
Waterproof electronic box / enclosure by pbtec
0 0
Stable and waterproof / watertight OpenSCAD customizer case / box / enclosure V6.1 by pbtecEdit December 2022: Updated Version 6.1 --> Seems Openscad has in certain circumstances problem with special characters (like ä) in comments…. Created new fixed version 6.1 (Nothing else has changed)I...
on Sep 13
From thingiverse.com
Convert a Server into a Desktop Gaming PC by hubinio
0 0
I bought an old HP Server DL380 Proliant G7 (200 €) to convert it into a desktop gaming PC. These old servers have a lot of power for a very low price plus mine has 64 GB Ram a DVD Drive and space for up to 8 hard drives in RAID. You also need a 10pin hp server power cable for pci-e 8pin + molex...
on Sep 12
From thingiverse.com
CONCEPTUAL DESIGN OF A HYBRID ELECTRIC BLIMP WITH COMPRESSED AIR SYSTEM by Isarts3d
0 0
01- Introduction- CONCEPTUAL DESIGN OF A HYBRID ELECTRIC BLIMP WITH COMPRESSED AIR SYSTEM Currently with the growing demand for energy, but with pespectivas of declining fossil fuels, the world turns to alternative renewable sources, mainly derived from sunlight, both in the use of wind...
on Sep 9
From thingiverse.com
Carcasa para ESPectrum con placa ESP32-SBC-FabGL de Olimex by soyjose
0 0
Carcasa totalmente rediseñada para ser utilizada con el emulador ESPectrum alojado en la placa ESP32-SBC-FabGL de Olimex, haciendo uso del teclado K-1000.Ahora el diseño es más rectilíneo. La parte superior está hecha en una sola pieza porque le eliminé la líneas verticales, dejando solo las...
on Sep 8
From thingiverse.com
Fursuit- or puppet-head base - version 44 - Toon canine by Tioh
0 0
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable.The model is scaled for costume size (it's sized for my own head - I have a small head) - rescale...
on Sep 7
From thingiverse.com
Holder stand for Speederpad case (FLSun V400 etc) by charlesca
0 1
This is a stand/holder designed for the custom Speederpad case I published here:https://www.thingiverse.com/thing:6749035That case exposes extra ports the original case does not have holes for, including an RJ45 ethernet jack you can solder onto the board, and also improves the...
on Sep 5
From thingiverse.com
Altered TCG Token Set by RaGGaMaAaN
0 1
This is my approach for the print and play version of Altered TCG as printing in 2d was way to fiddly.I would recommend printing with an Infill of 90% so that the tokens have a nice, high-quality feel.
on Sep 4
From thingiverse.com
0 1
Extra slim and secure fit with tight tolerances and retention clip. Made to fit with the minimalist cover. Can fit bare, but retention clip might not hold it in. Keep your marauder pins safe when in your pocket or bag. source scad included in case you want to tweak fitment for your own case
on Sep 4
From thingiverse.com
Yazzo Disc Joint by WilliamAAdams
0 1
I am trying to construct different forms of space frames both movable and stationary. One of the items I have found I need is a ball and socket joint. This thing provides the socket, and places them around the perimeter of a disc.It's parametric, in that you can construct a new disc joint,...
on Sep 3
From thingiverse.com
Apple Watch Charging Dock - Classic Mac by option8
0 1
[updated February 5, 2016: should be easier to print. Removed the feet from the insert, thickened the bezel and other sections. Removed some overhangs. Opened up the slot at the top.]This is a two-part charging dock for the Apple Watch.Part 1 (stand) holds the wireless charging puck in place....
on Sep 3
From thingiverse.com
Case for Harlequin (replacement case for Sinclair ZX Spectrum) by celestinox
0 1
There are 2 versions of the Sinclair ZX Spectrum case; a first 2 parts for printers that have the ability to print large pieces; and a second version of the usual 4 piece bed 200x200mm printers.This case is a traditional approach to the original model. No fingerprints for rubber feet. And the...
on Sep 2
From thingiverse.com
Star Trek: The Next Generation transporter room diorama by alanyoung001
0 1
Based on this model by Aryh Peixoto Filho:https://3dwarehouse.sketchup.com/model/u17fbe8f9-7084-4dae-a14f-95973fb8e4a1/Transporter-RoomAt 100%, it's scaled to 3.75" (ReAction, Galoob) action figures. Of course, you can scale it up for Playmates or Mego or whatever.Made by me because I wanted it...
on Sep 2
From thingiverse.com
Steam Deck Carrying Case Insert For EU Plugs Flushed (2,5mm) by Bhgp
0 1
I have removed the fixed supports and have made the area for the charger approx. 2,5 mm deeper, so it flushes better.Sliced in Cura 5.0Printed with 0,28mm layer height (PLA) with tree supports (Ender 3 Pro)
on Sep 2
From thingiverse.com
Thingiverse - Digital Designs for Physical Objects
0 1
Download files and build them with your 3D printer, laser cutter, or CNC.
on Sep 2
From thingiverse.com
0 1
It's very fashion-forward to put remnants of dead creatures in your hair... so I am told. 3D printing makes fashion possible without murder of innocent creatures.I used the bone from this thing https://www.thingiverse.com/thing:367268/files and scaled accordingly.
on Sep 1
From thingiverse.com
0 1
Ultra compact case for WeMos D1 mini board. Assembles with 3mm screws. Includes reset button extender.
on Sep 1
From thingiverse.com
Case with extra ports for FLSUN SpeederPad by charlesca
0 1
The FLSUN V400 printer is controlled by the "SpeederPad", a small computer similar to a Raspberry Pi in a case with a touchscreen, connected to the printer via USB, along with flash drives and a WiFi connection.However, the board has an ethernet connection built-in -- but without the actual...
on Aug 30
From thingiverse.com
Thingiverse - Digital Designs for Physical Objects
0 0
Download files and build them with your 3D printer, laser cutter, or CNC.
on Aug 28
From thingiverse.com
0 0
The immersion heater on the hot water tank had a metal cap perilously close to the live terminals for the heating elements. This is designed to fit over the octagonal nut on the hot tank, leaving a space for wires and some vents on top to allow hot air out.
on Aug 28
From thingiverse.com
7 wonders token tray: 6 coins, +3 military, leader by madcollector
0 0
Tidy tray, stored under the cards
on Aug 28
From thingiverse.com
Parametric Probe Holder by billgertz
0 0
This object features Open in CustomizerSo you have DMM, Oscope and other equipment probes or cables, but they seem to "walk away"? Why not corral them with this parametric probe holder! This thing has been used for drafting pens, white board markers and trimming tools. But that's not all; this...
on Aug 28
From thingiverse.com
Nintendo Switch Single Joy-Con Grip 2024 by Manabun_Lab
0 0
This Joycon grip is an updated version of the data I posted on Thingiverse in 2018.https://www.thingiverse.com/thing:2769344If you wish to sell prints, please obtain a commercial license from here:https://www.patreon.com/Manabun_labAlthough a successor to the Nintendo Switch is expected to be...
on Aug 27
From thingiverse.com
Floppy disk construction kit by Amplivibe
0 0
Bring out your old floppy disks and build things with it! The 'normal' piece has 3 sides and will fit a corner of a cube. The 'two-side' piece let's you make an open box. Print 8 normal pieces to make a cube Print 4 normal pieces and 4 two-side pieces to make an open box You can print the...
on Aug 27